Key features

• Grade 8620 tool steel, heat treated to ~Rockwell 45.

• CNC machined solid construction for durability and concentricity.

• Short profile—compact length for unobstructed handling.

• Top and side slots redirect gas to reduce recoil and muzzle climb.

• Black oxide finish for corrosion resistance and low reflectivity.

• Reduced back‑pressure to limit adverse effects on cycling.

• Includes crush washer for correct installation.

• Thread: 1/2×28 TPI (fits common 9mm / 350Legend threads).

Short description

This compact compensator redirects propellant gases through top and side ports to dramatically reduce felt recoil and muzzle rise. Precision CNC machining from heat‑treated 8620 steel and a black oxide finish deliver a reliable, low‑profile muzzle device for competition, training, and tactical use.

Package contents

• 1 × compact 9mm / 350Legend compensator (1/2×28 TPI)

• 1 × crush washer

Installation & care

1. Always confirm the firearm is unloaded and pointed in a safe direction.

2. Place crush washer on barrel thread, hand‑start compensator, then tighten to desired alignment with an appropriate wrench.

3. Check torque/clocking per firearm manufacturer recommendations when available.

4. Inspect threads and device regularly; clean carbon build‑up and reapply light corrosion protection as needed.

5. Remove and store dry for long periods; check washer and re‑torque after first range session.

Safety & compliance

• Do not modify the compensator.

• Avoid pointing at people, animals, or reflective surfaces when installing or testing.

• Follow all local laws, range rules, and competition regulations regarding muzzle devices.